What machines are needed for screw anti-loosening gluing processing?

What machines are needed for screw anti-loosening gluing processing?

Generally speaking, only one device is needed. Due to the wide variety of screws, screw anti-loosening manufacturers generally only produce traditional equipment.

Screw anti-loosening is composed of equipment such as the frame, high frequency, vibrating disc, air compressor, recovery device, and water tower. These devices are indispensable. If it is an air compressor and a water tower, usually one company is sufficient. If there are many devices, choose the ones with high power.

For non-standard equipment, production usually can only commence after deposit. If there is no deposit, the cost of non-standard equipment is very high and the processing cost increases significantly. Each accessory should be designed according to the difficulty of the screw. Otherwise, problems are very likely to occur in the production of screws. Therefore, customization is necessary for effective production.

Traditional equipment generally produces hex socket screws, hexagon socket screws, round head screws, disc head screws, etc. Generally, it has a head. The length is generally less than 100mm.