Tel: 13951188528/0512-57663358
Email: nicest_metal@163.com
Website: www.nicestmetal.com
Address: Building 2, No. 323, Qingyang North Road, Zhoushi Town, Kunshan City, Jiangsu Province
Locking & Sealing
High temperature ND Patch Hi-Temp is a pre-applied nylon coating which is fused to the internal or external threads of a fastener, providing inert pressure against the threads of the mating part. It is dry to the touch and coated parts are ready for use right out of the box. Unlike reactive thread lockers, ND Patch Hi-Temp performs immediately upon assembly, without any curing time.
When assembled with a mating part, ND Patch Hi- Temp is compressed. The engineered plastic resists this compression and acts like a wedge, increasing the metal to metal contact 180° opposite the material. This mechanical force creates a strong, yet fully adjustable, lock which will not weaken, even under extreme vibration. ND Patch Hi-Temp is commonly known as a prevailing torque type self-locking fastener.
ND Patch Hi- Temp is normally positioned one to three threads back from the end of the fastener to assure ease of starting. The normal coating length of ND Patch is four to six threads. Patch location and coating length can be altered for specific applications.
As with all of our ND-Applied products, we can apply the material to your fasteners at any one of our regional service centers, or we can supply you with fasteners already coated with ND Patch Hi-Temp.
FEATURES:
Resists Heat & Cold: ND Patch Hi-Temp maintains its torque performance through temperatures as low as -70° F (-57° C) to as high as 500° F (260° C).
Chemical Resistant: ND Patch Hi-Temp will not dry, shrink, or lose resiliency when exposed to commercial solvents, alcohol, gasoline, oil, caustic soda, jet fuel, etc.
Reusable: Fasteners coated with ND Patch Hi-Temp can be repeatedly installed and removed without damage to threads. It is particularly resistant to deformation, which makes it ideal for reuse.
Saves Money: Use of ND Patch Hi-Temp eliminates the need for costly lock washers, cotter pins, or castellated nuts. You get a close fit without the costs involved in obtaining close tolerances. Moreover, ND Patch Hi- Temp is less expensive than applying bottled thread locking compounds at the point of assembly.
SPECS MET:
MILITARY: MIL-N-25027, MIL-F-18240E, MIL -DTL-18240F
●U.S.Military: MIL-N-25027, MIL-N-25027，MIL-F- 18240E, MIL -DTL- 18240F, MIL-DTL-32258
AUTOMOTIVE:
●Chrysler: PF-5144, PF-5461, PF-6157, PF-6158
●Ford: ES-382101-S100, ES-378813-S100,ES-N800688-S 100,WA970, ES-21002-S100
●General Motors: GM 6189P
FASTENER STANDARDS:
●IFI100，IFI124; IFI 155; IFI 524
●DIN 267 Part28
OEM:
●Detroit Diesel: 9S240
Eaton: 205372
●Meritor(Rockwell); Q-70
New Process Gear: PS-616
●John Deere: JDT905
SPECIFICATIONS:
| Primary Usage | Lock and Seal |
| Reusability | Up to 5 on-off cycles |
| Material | Nylon 11 |
| Color | Orange and Gray* |
| Hardness | Shore D(ASTM D2240) 70-80 Durometer |
| Salt Spray Resiststance | (ASTM B117) 1000+ hours (X Scribe) |
| Taber Abrasion | (ASTM D4060) 10- 18 mg loss CS- 10 wheel, 1000g load，1000 cycles. (Varies with color) |
| Dielectric Strength | (ASTM D149 short time) 800- 1200 volts/mil @10.0mils (Varies with color) |
| Direct impact Resistance | (MPTM 0002)160 in.lbs.@10.0mils |
| Shelf Life | The on part shelf life is indefnite under ideal storage conditions [+40° F(+4°C) to+90°F (+32" C)], but must be recertifed annually. |
**QPL-18240&MIL -DTL-18240F requires yellow nylon
ND Patch and ND Industries are registered trademarks of ND Industries,Inc.
