Tel: 13951188528/0512-57663358
Email: nicest_metal@163.com
Website: www.nicestmetal.com
Address: Building 2, No. 323, Qingyang North Road, Zhoushi Town, Kunshan City, Jiangsu Province
Lock and Seal
Nylon glue is a pre-applied nylon coating that can be used on fasteners with internal or external teeth to provide inert pressure on the teeth of the engaging components. Nylon glue is dry, and coated parts are ready to use. Nylon glue can be assembled immediately without the time required for curing.
During assembly, the nylon glue is compressed, and the engineering plastic resists this compression and pushes the screw to the other side, increasing metal-to-metal contact on the opposite side of the nylon glue. This physical force produces a strong, adjustable locking force that won't be weakened by extreme vibrations. Nylon glue is often referred to as torque self-locking fasteners.
Nylon glue is usually applied from one to three teeth on the bottom to ensure easy locking. The length of a normal coating of nylon glue is 1.2-1.5 times the outer diameter of the tooth. The position and length of the coating can be changed for specific applications, and a variety of color options are available.
As with all our pre-coated product samples, we can provide nylon glue coating service at any of our regional service centers, or we can supply nylon glue coated fasteners.
Features:
Chemical Resistance: Nylon glue will not dry, shrink or lose properties when exposed to commercial solvents, alcohol, gasoline, petroleum, caustic soda, jet fuel, etc.
Reusability: Fasteners coated with nylon glue can be installed and removed repeatedly without damaging the threads. Particularly resistant to deformation, which makes it suitable for repeated use.
Maintains full strength: Nylon glue is not drilled or milled, so there is no loss of fastener strength or hardness and no troublesome burrs or chips.
Save money: Using nylon glue doesn't require expensive lock washers, cotter pins or cage nuts. You get a low cost locking solution.
SPECS MET：
MILITARY: MIL-N-25027, MIL-F- 18240E, MIL-DTL- 18240F
●U.S.Military: MIL -N-25027, MIL-N-25027，MIL-F- 18240E, MIL-DTL- 18240F, MIL-DTL-32258
AUTOMOTIVE:
●Chrysler: PF-5144, PF-5461, PF-6157, PF-6158
●Ford: ES-382101-S100, ES-378813-S100,ES-N800688-S 100,WA970, ES-21002-S100
●General Motors: GM 6189P
FASTENER STANDARDS:
●IFI100, IFI124; IFI 155; IFI 524
●DIN 267 Part 28
OEM:
●Detroit Diesel: 9S240
●Eaton: 205372
●Meritor(Rockwell); Q-70
●New Process Gear: PS-616
●John Deere: JDT905
SPECIFICATIONS：
| Primary Usage | Lock and Seal |
| Reusability | Up to 15 on-off cycles |
| Material | Nylon 11 |
| Color | Yellow (Other colors available upon request**) |
| Hardness | Shore D (ASTM D2240) 70-80 Durometer |
| Salt Spray Resiststance | (ASTM B117) 1000+ hours (X Scribe) |
| Taber Abrasion | (ASTM D4060) 10- 18 mg loss CS- 10 wheel, 1000g load，1000 cycles. (Varies with color) |
| Dielectric Strength | (ASTM D149 short time) 800- 1200 volts/mil @10.0mils (Varies with color) |
| Direct impact Resistance | (MPTM 0002)160 in.lbs.@10.0mils |
| Shelf Life | The on part shelf life is indefnite under ideal storage conditions [+40° F(+4°C) to+90°F (+32" C)], but must be recertifed annually. |
**QPL-18240&MIL -DTL-18240F requires yellow nylon
ND Patch and ND Industries are registered trademarks of ND Industries,Inc.
